NTD A630C is an alternative to conventional platform models. The smart design in combination with a wide range of options and accessories make the NTD A630C cabin lift the perfect solution for movement between levels. Typical usage for this cabin, lift or wheel chairlift or house or home lift is in offices and houses.

NTD A630C has a frosted glass ceiling with recessed LED-spotlights. The control panel with level indicator in one is surrounded with mirror glass. The cabin lift is equipped with sliding doors powder coated for design and durability, depending on what options the choice would be, the doors can be supplied in different colours and surfaces, with or without glass. NTD A630C takes loads up to 630 kg.

If you want the product info of this lift type to be send to you by email automatically, then fill in the form below.

 *
 *
name@company.com
 *
 *
016-1234567 or 03-1234 5678

Technical specifications A630 C

Feature

Description Feature Description
Rated load 630kg Safety system Emergency batery lowering (automatic to ground floor)
Indoor / outdoor Power supply 380-400Volt 3-phase 50Hz/16Amp frequncy convertor
Speed 0.15m/sec (9m/min) Door configuration Single entry; open through
Lifting height <13 meters (max 6 stops) Door finish standard Two bladed sliding doors; finished in dark grey (RAL 7024) or Titanium (RAL 7004) colours
Push button Autorun Door finish options Panorama glass; fireproof EI60; other RAL colours
Cabin dimension 1100 x 1400mm (width x length) Control panels Flat panel with inset in braille; 7inch screen with level indicator; maximum load and direction.
Shaft dimension 1735 x 1730mm; 1735 x 1920mm Cabin walls Steel panel finished in traffic white (RAL 9016); as standard; profiles in natural anodized aluminium
Cut out size 1775 x 1810mm; 1775 x 2040mm Cabin ceiling Frosted white with LED spot lights
Pit 100mm Floor Grey rubber mat as standard
Door configuration Single entry A or C side; open through Safety Speed governer in accordance EN81-70. Overlad sensor with alarm. The cabn roof is accessible with a load up to 100kg. Fire drive is optional.
Overhead clearence 2700mm Options Cabin walls: steel panels in any RAL colour; or mirror; glass on side A;B;C. Shaft walls: steel panels in any RAL colour; glass on side A;B;C. Telephones; locking system; elbow buttons; IR control; automatich shaft lights; voice announcement; level indicator on door; extra control panel; light curtain; arrival bell and more.
Suspending ceiling 2195mm
Entrance dimension 900 x 2100mm
Control system Micro computer control system by CAN
Lubrication Automatic
Motor power 4kWatt
Shaft finish steel panels RAL 9016
Certification MD 2006/42/EC; EM 81-70

Below are the features available for the A630C: