The NTD A400 is a well designed homelift screw-driven platform lift, especially suitable for situations where simple installation is required without unnecessary alterations to the existing building. NTD A400 homelift is aesthetically styled and thus is suitable for all environments. The high quality makes NTD A400 very reliable and is a favourite among many customers. It finds its usage as a wheelchair lift or platformlift, in houses, homes and offices. This homelift is made in Sweden and is one of the most commonly used homelifts in Europe.

The lift structure is covered by toughened and laminated glazed or steel panels, providing a stylish and reliable platform. The nominal lifting capacity is 400 kg and the maximum lift height is 13 metres. Therefore this home lift suits almost every location or house situation.

No pit is required
The A400 homelift can be installed directly onto the floor, which avoids the cost of excavating a shaft under the floor level.

Easy to use
The A400 homelift is designed with emphasis on the ease of use. It is easy to operate and it is very reliable.

Safety first
All the outer edges of the platform have a flexible safety frame that immediately stops the lift when touched. The speed is limited and the lift control system is “hold to run”. In addition, it is equipped with an emergency stop and alarm. It has very high reliability.

Cost efficient
The installation of this type of homelift is very cost efficient. There is no need for extensive building work or a separate machine room. Thus the installation is easy to carry out, which helps to keep the maintenance costs low.

Tested and certified
The A400 homelift of NTD is constructed, tested and approved according to the Machinery Directive and it also conforms to all applicable European standards. It is EC type approved and certified by Det Norske Veritas (DNV). The lift is CE marked and comes with a Declaration of Conformity.

Interested in this home lift, please leave your details and we send you the product sheet in your email inbox.

 *
name@company.com
 *
 *
 *
016-1234567 or 03-1234 5678

 

Technical specifications A400

Feature

Description Feature Description
Manuacturer NTD LIFTS AB; Sweden Lift shaft Prefabricated lacquered steel panels; white RAL 9016 and aluminium details on each corner; glass panels are optional.
Rated load 400kg Doors Can be placed on all three sides. Large glazed partitions are available; with several different optional glazed finishes to choose from. Can also be ordered with a half door on the upper level.
Drive system Screw and nut drive Door dimensions 900x2000mm or half door 900x1100mm on upper level.
Lifting height 13 meters (max 6 stops) Control system Micro computer control system
Speed <0.15m/sec Power supply standard 400Volt 3phase 50Hz 16Amp
Pit 50mm or no pit with ramp
Operating system Hold to run on platform and extrenal switch by impuls Power supply options 220-240 Volt 1 phase frequency control or 380-400Volt 3 ph frequency control
Standard platform dimension 1000 x 1500mm width x length) or  1100 x 1500mm Motor power 2.2kWatt
External lift dimension Platfrom width+359mm  Length+58mm (L=+107 pass through) Other options Antother RAL colour. It is also possible to obtain all visible surfaces in brushed stanless steel.
Other platform dimensions possible S1=800 x 1250mm or  S2=900 x 1500mm or S3=1000 x 1300mm or S4=1100x1400mm European Certification EU Machinery Directive 2006/42/EC

Features of the NTD A400

In the slide show all the additional features are stated. You can stop the sliding by clicking on the slide show.

Sample installations (link to image gallery)